MG-10 Gas Solenoid Valve

QUEEN SOLENOID VALVES

Discription

Suitable for liquefied petroleum gas, low vacuum, and air.
Normally closed direct-acting solenoid valve designed for low pressure and high flow.
Can be mounted in vertical position or vertical ±15° is allowed.
Operates directly in low-pressure conditions.
The maximum operating pressure is 1 kgf/cm², and pressures below 1 kgf/cm² can be customized upon request.

MG-10

MG-10 direct-acting solenoid valve with zinc alloy body and PT 3/8" port, ideal for LPG applications.

MG-10

MG-10 直動式電磁閥，鋅合金本體，PT 3/8吋，適用於液化石油氣（LPG）控制系統

MG-10

MG-10 direct-acting solenoid valve with zinc alloy body and PT 3/8" port, ideal for LPG applications.

MG-10

MG-10 direct-acting solenoid valve with zinc alloy body and PT 3/8" port, ideal for LPG applications.

1/3

Specifications

Model

MG-10

Action mode

Normally closed

Voltage

AC 24, 110, 220, 380V 50/60Hz

DC 12, 24V

Media

LPG gas, low vacuum, air

Fluid temp.

0~60°C

Fluid viscosity

Pressure range

0~1 kgf/cm²

Connection size

PT 3/8"

Orifice

10 mm

Cv valve

1.7

Direction

Vertical

Valve body

Zinc alloy

Coil type

Iron case coil: IP54

Before installation, please check whether the solenoid valve voltage is consistent with the power supply voltage.
- AC voltage tolerance: ±10%
- DC voltage tolerance: ±1%
If there are unclean impurities in the fluid, a filter should be installed to avoid reducing the service life and hindering the operation of the solenoid valve.
Please install the solenoid valve in the direction of the fluid.