MK2A Normally Open Direct Acting Solenoid Valve
QUEEN SOLENOID VALVES
Discription
-
Suitable for air, inert gases, vacuum (10^-4 Torr), water, kerosene oil, and oil (Below 50 cst).
-
Normally open direct acting solenoid valve.
-
Can be mounted in vertical and horizontal position.
-
Operates directly without requiring pressure differential.
-
Connection size: PT 1/4", PT 3/8".
Specifications
Model
(1) MK2A-0530-8(10)C
(2) MK2A-0820-8(10)C
(3) MK2A-1216-8(10)C
Action mode
Normally open
Voltage
AC 24, 110, 220, 380V 50/60Hz
DC 12, 24V
Media
Air, gas, vaccum, water, oil
Fluid temp.
-5~90°C
Fluid viscosity
Oil : 50cst or less
Pressure range
(1) Air : 4 water, oil : 3 kgf/cm2
(2) Air : 8 water, oil : 6 kgf/cm2
(3) Air : 12 water, oil : 8 kgf/cm2
Connection size
PT 1/4"
PT 3/8"
Orifice
(1) 3 mm
(2) 2 mm
(3)1.6 mm
Cv valve
(1) 0.25
(2) 0.15
(3) 0.095
Direction
Vertical / Horizontal
Valve material
BSBF (SUS 303L on request)
Coil type
Iron case coil: IP54
Cautions
-
Before installation, please check whether the solenoid valve voltage is consistent with the power supply voltage.
- AC voltage tolerance: ±10%
- DC voltage tolerance: ±1% -
If there are unclean impurities in the fluid, a filter should be installed to avoid reducing the service life and hindering the operation of the solenoid valve.
-
Please install the solenoid valve in the direction of the fluid.
-
Not suitable for freezing fluids.
Certificate
-
CE