MT-32~50FW Pilot-operated Flanged Solenoid Valve
QUEEN SOLENOID VALVES
Discription
-
Suitable for air, inert gases, water, and oil (Below 50 cst).
-
Can be mounted in vertical and horizontal position.
-
With dual pilot hole, fast response.
-
Maximum working temperature up to 90 °C.
-
The "M17" marking indicates a waterproof coil with an IP65 rating.
-
The standard model has a maximum pressure of 10 kgf/cm², while customized options are available for a maximum pressure of 16 kgf/cm² or 20 kgf/cm².
-
Connection size: Flanged 1-1/4", 1-1/2", 2".
Specifications
Model
(1) MT-32FW (M17)
(2) MT-40FW (M17)
(3) MT-50FW (M17)
Action mode
Normally closed
Voltage
AC 24, 110, 220, 380V 50/60Hz
DC 12, 24V
Media
Air, gas, water, oil
Fluid temp.
-5~90°C
Fluid viscosity
Oil : 50 cst or less
Pressure range
Water, air : 0.3~10 kgf/cm2
Oil : 0.3~7 kgf/cm2
Connection size
(1) Flange 1-1/4"
(2) Flange 1-1/2"
(3) Flange 2"
Orifice
(1) 32 mm
(2) 40 mm
(3) 50 mm
Cv valve
(1) 15.0
(2) 20.0
(3) 33.0
Direction
Vertical / Horizontal
Valve material
BC6
Coil type
Iron case coil: IP54
Waterproof coil: IP65
Order Information
Cautions
-
Before installation, please check whether the solenoid valve voltage is consistent with the power supply voltage.
- AC voltage tolerance: ±10%
- DC voltage tolerance: ±1% -
If there are unclean impurities in the fluid, a filter should be installed to avoid reducing the service life and hindering the operation of the solenoid valve.
-
Please install the solenoid valve in the direction of the fluid.
-
Pilot-operated solenoid valves require a minimum pressure to open.
-
Not suitable for freezing fluids.
Certificate
-
CE