
MK15~25S Waterproof type Steam Solenoid Valve
QUEEN SOLENOID VALVES
Discription
-
Suitable for steam, air, vacuum, inert gases, water, and oil (Below 50 cst).
-
Semi-direct acting solenoid valve, wide operating pressure range from 10 Torr to 10 kgf/cm²,fast response, long life constructive device.
-
Can be mounted in vertical position or vertical ±15° is allowed.
-
Fluid temperature from -10 °C ( non-freezing) to 180 °C.
-
The "M17" marking indicates a waterproof coil with an IP65 protection rating.
Specifications
Model
(1) MK-15S-M17
(2) MK-20S-M17
(3) MK-25S-M17
Action mode
Normally closed
Voltage
AC 24, 110, 220, 380V 50/60Hz
DC 12, 24V
Media
Steam, air, vacuum,
Inert gases, water, oil
Fluid temp.
-10~180°C
Fluid viscosity
Oil : 50 cst or less
Pressure range
Steam : 0~10 kgf/cm2
Water : 0~8 kgf/cm2
Oil : 0~7 kgf/cm2
Connection size
(1) PT 1/2"
(2) PT 3/4"
(3) PT 1"
Orifice
(1) 14 mm
(2) 19 mm
(3) 25 mm
Cv valve
(1) 3.0
(2) 4.9
(3) 6.2
Direction
Horizontal
Valve material
BC6
Coil type
Waterproof coil: IP65
Cautions
-
Before installation, please check whether the solenoid valve voltage is consistent with the power supply voltage.
- AC voltage tolerance: ±10%
- DC voltage tolerance: ±1% -
If there are unclean impurities in the fluid, a filter should be installed to avoid reducing the service life and hindering the operation of the solenoid valve.
-
Please install the solenoid valve in the direction of the fluid.
-
Not suitable for freezing fluids.
Certificate
-
CE