MK10~25S Steam Solenoid Valve
QUEEN SOLENOID VALVES
Discription
-
Suitable for steam, air, vacuum, inert gases, water, and oil (Below 50 cst).
-
Semi-direct acting solenoid valve, wide operating pressure range from 10 Torr to 10 kgf/cm²,fast response, long life constructive device.
-
Can be mounted in horizontal position or horizontal ±15° is allowed.
-
Fluid temperature from -10 °C ( non-freezing) to 180 °C.
Specifications
Model
(1) MK-10S
(2) MK-15S
(3) MK-20S
(4) MK-25S
Action mode
Normally closed
Voltage
AC 24, 110, 220, 380V 50/60Hz
DC 12, 24V
Media
Steam, air, vacuum,
Inert gases, water, oil
Fluid temp.
-10~180°C
Fluid viscosity
Oil : 50 cst or less
Pressure range
Steam : 0~10 kgf/cm2
Water : 0~8 kgf/cm2
Oil : 0~7 kgf/cm2
Connection size
(1) PT 3/8"
(2) PT 1/2"
(3) PT 3/4"
(4) PT 1"
Orifice
(1) 10 mm
(2) 14 mm
(3) 19 mm
(4) 25 mm
Cv valve
(1) 1.3
(2) 3.0
(3) 4.9
(4) 6.2
Direction
Horizontal
Valve material
BC6
Coil type
Iron case coil: IP54
Cautions
-
Before installation, please check whether the solenoid valve voltage is consistent with the power supply voltage.
- AC voltage tolerance: ±10%
- DC voltage tolerance: ±1% -
If there are unclean impurities in the fluid, a filter should be installed to avoid reducing the service life and hindering the operation of the solenoid valve.
-
Please install the solenoid valve in the direction of the fluid.
-
Not suitable for freezing fluids.
Certificate
-
CE